Connections Mac OS

broken image


-->

This guide describes how to use Pair to Mac to connect Visual Studio 2019to a Mac build host. The same instructions apply to Visual Studio 2017.

Remote Desktop → Mac OS X Instructions The following page(s) contain instructions on using Remote Desktop to connect to Faculty & Staff Windows computers on the UMKC campus (from off-campus). Your campus computer must be powered on to receive connections. Drag services within the list to change their order. Your Mac will try to connect to the service at the top of the list first, then continue in descending order until a connection is successful. Virtual private network (VPN) connections can't be reordered, because they always take priority over other connections. Click OK, then click Apply.

Overview

Building native iOS applications requires access to Apple's build tools,which only run on a Mac. Because of this, Visual Studio 2019 must connect toa network-accessible Mac to build Xamarin.iOS applications.

Visual Studio 2019's Pair to Mac feature discovers, connects to,authenticates with, and remembers Mac build hosts so that Windows-basediOS developers can work productively.

Pair to Mac enables the following development workflow:

  • Developers can write Xamarin.iOS code in Visual Studio 2019.

  • Visual Studio 2019 opens a network connection to a Mac build host anduses the build tools on that machine to compile and sign the iOS app.

  • There is no need to run a separate application on the Mac – VisualStudio 2019 invokes Mac builds securely over SSH.

  • Visual Studio 2019 is notified of changes as soon as they happen. Forexample, when an iOS device is plugged in to the Mac or becomes availableon the network, the iOS Toolbar updates instantly.

  • Multiple instances of Visual Studio 2019 can connect to the Macsimultaneously.

  • It's possible to use the Windows command-line to build iOS applications.

Note

Before following the instructions in this guide, complete the following steps:

  • On a Windows machine, install Visual Studio 2019
  • On a Mac, install Xcode and Visual Studio for Mac
    • You must manually open Xcode after installing so that it can add any additional components.

If you would prefer not to install Visual Studio for Mac, Visual Studio 2019can automatically configure the Mac build host with Xamarin.iOS and Mono.You must still install and run Xcode.For more information, see Automatic Mac provisioning.

Enable remote login on the Mac

To set up the Mac build host, first enable remote login:

  1. On the Mac, open System Preferences and go to the Sharing pane.

  2. Check Remote Login in the Service list.

    Make sure that it is configured to allow access for All users, orthat your Mac username or group is included in the list of allowedusers.

  3. If prompted, configure the macOS firewall.

    If you have set the macOS firewall to block incoming connections, youmay need to allow mono-sgen to receive incoming connections. An alertappears to prompt you if this is the case.

  4. If it is on the same network as the Windows machine, the Mac shouldnow be discoverable by Visual Studio 2019. If the Mac is still notdiscoverable, try manually adding a Mac or takea look at the troubleshooting guide.

Connect to the Mac from Visual Studio 2019

Now that remote login is enabled, connect Visual Studio 2019 to the Mac.

  1. In Visual Studio 2019, open an existing iOS project or create a new oneby choosing File > New > Project and then selecting an iOS projecttemplate.

  2. Open the Pair to Mac dialog.

    • Use the Pair to Mac button iOS toolbar:

    • Or, select Tools > iOS > Pair to Mac.

    • The Pair to Mac dialog displays a list of all previously-connectedand currently-available Mac build hosts:

  3. Select a Mac in the list. Click Connect.

  4. Enter your username and password.

    • The first time you connect to any particular Mac, you areprompted to enter your username and password for that machine:

      Tip

      When logging in, use your system username rather than full name.

    • Pair to Mac uses these credentials to create a new SSH connectionto the Mac. If it succeeds, a key is added to the authorized_keysfile on the Mac. Subsequent connections to the same Mac will loginautomatically.

  5. Pair to Mac automatically configures the Mac.

    Starting with Visual Studio 2019 version15.6,Visual Studio 2019 installs or updates Mono and Xamarin.iOS on aconnected Mac build host as needed (note that Xcode must still beinstalled manually). See Automatic Macprovisioning for more details.

  6. Look for the connection status icon.

    • When Visual Studio 2019 is connected to a Mac, that Mac's itemin the Pair to Mac dialog displays an icon indicating thatit is currently connected:

      There can be only one connected Mac at a time.

      Tip

      Right-clicking any Mac in the Pair to Mac list brings up a contextmenu that allows you to Connect..., Forget this Mac, orDisconnect:

      If you choose Forget this Mac, your credentials for the selectedMac will be forgotten. To reconnect to that Mac, you will need to re-enteryour username and password.

If you have successfully paired to a Mac build host, you are ready to buildXamarin.iOS apps in Visual Studio 2019. Take a look at theIntroduction to Xamarin.iOS for Visual Studioguide.

If you have not been able to pair a Mac, try manually adding aMac or take a look at the troubleshootingguide.

Manually add a Mac

If you do not see a particular Mac listed in the Pair to Mac dialog,add it manually:

  1. Locate your Mac's IP address.

    • Open System Preferences > Sharing > Remote Login on your Mac:

    • Alternatively, use the command line. In Terminal, issue this command:

      Depending on your network configuration, you may need to use aninterface name other than en0. For example: en1, en2, etc.

  2. In Visual Studio 2019's Pair to Mac dialog, select Add Mac...:

  3. Enter the Mac's IP address and click Add:

  4. Enter your username and password for the Mac:

    Tip

    When logging in, use your system username rather than full name.

  5. Click Login to connect Visual Studio 2019 to the Mac over SSH and addit to the list of known machines.

Automatic Mac provisioning

Starting with Visual Studio 2019 version 15.6,Pair to Mac automatically provisions a Mac with software necessary forbuilding Xamarin.iOS applications: Mono, Xamarin.iOS (the softwareframework, not the Visual Studio for Mac IDE), and various Xcode-relatedtools (but not Xcode itself).

Important

  • Pair to Mac cannot install Xcode; you must manually install it on theMac build host. It is required for Xamarin.iOS development.
  • Automatic Mac provisioning requires that remote login isenabled on the Mac, and the Mac must be network-accessible to the Windowsmachine. See Enabling remote login on the Macfor more details.
  • Automatic Mac provisioning requires 3GB of free space on the Mac to install Xamarin.iOS.

Pair to Mac performs necessary software installations/updates when VisualStudio 2019 is connecting to theMac.

Mono

Pair to Mac will check to make sure that Mono is installed. If it is notinstalled, Pair to Mac will download and install the latest stable versionof Mono on the Mac.

Progress is indicated by various prompts, as shown by the followingscreenshots (click to zoom):

MonoInstall CheckDownloadingInstalling

Xamarin.iOS

Pair to Mac upgrades Xamarin.iOS on the Mac to match the versioninstalled on the Windows machine.

Important

Pair to Mac will not downgrade Xamarin.iOS on the Mac from alpha/betato stable. If you have Visual Studio for Mac installed, set yourrelease channel asfollows:

  • If you use Visual Studio 2019, select the Stable updates channel inVisual Studio for Mac.
  • If you use Visual Studio 2019 Preview, select the Alpha updateschannel in Visual Studio for Mac.

Progress is indicated by various prompts, as shown by the followingscreenshots (click to zoom):

Xamarin.iOSInstall CheckDownloadingInstalling

Xcode tools and license

Pair to Mac will also check to determine whether Xcode has been installedand its license accepted. While Pair to Mac does not install Xcode, itdoes prompt for license acceptance, as shown in the following screenshots(click to zoom):

XcodeInstall CheckLicense Acceptance

Additionally, Pair to Mac will install or update various packagesdistributed with Xcode. For example:

  • MobileDeviceDevelopment.pkg
  • XcodeExtensionSupport.pkg
  • MobileDevice.pkg
  • XcodeSystemResources.pkg

The installation of these packages happens quickly and without a prompt.

Note

These tools are distinct from the Xcode Command Line Tools, whichas of macOS 10.9 areinstalled with Xcode.

Troubleshooting automatic Mac provisioning

If you encounter any trouble using automatic Mac provisioning, take a lookat the Visual Studio 2019 IDE logs, stored in%LOCALAPPDATA%XamarinLogs16.0. These logs may contain error messagesto help you better diagnose the failure or get support.

Connections Mac OS

Build iOS apps from the Windows command-line

Pair to Mac supports building Xamarin.iOS applications from the commandline. For example:

The parameters passed to msbuild in the above example are:

  • ServerAddress – The IP address of the Mac build host.
  • ServerUser – The username to use when logging in to the Mac build host.Use your system username rather than your full name.
  • ServerPassword – The password to use when logging in to the Mac build host.

Note

Visual Studio 2019 stores msbuild in the following directory:C:Program Files (x86)Microsoft Visual Studio2019MSBuildCurrentBin

The first time Pair to Mac logs in to a particular Mac build host fromeither Visual Studio 2019 or the command-line, it sets up SSH keys. With thesekeys, future logins will not require a username or password. Newlycreated keys are stored in %LOCALAPPDATA%XamarinMonoTouch.

If the ServerPassword parameter is omitted from a command-line buildinvocation, Pair to Mac attempts to log in to the Mac build hostusing the saved SSH keys.

Summary

This article described how to use Pair to Mac to connect Visual Studio 2019 to aMac build host, enabling Visual Studio 2019 developers to build native iOSapplications with Xamarin.iOS.

Next steps

Connect to Wi-Fi

You can use the Wi-Fi menu to quickly connect to a nearby wireless network.

  1. Click the Wi-Fi icon ( or ) in the menu bar.
  2. If Wi-Fi is off, choose 'Turn Wi-Fi on.'
  3. Select a nearby Wi-Fi network from the list.

If you don't see your network listed, make sure it's nearby and that others can connect to it. It could also be a 'hidden' network. You can connect to a hidden network by choosing 'Join other network' and entering the name of the network you're trying to use.

The strength of each nearby network is shown next to its name. More darkened bars indicate a stronger network connection.

Enter your password

Networks that have a lock icon next to their name require a password. After you select your network, enter the network password when you're prompted. If you don't know the network password, check with the owner of the Wi-Fi network you're trying to join.

Use a cellular device as your Wi-Fi connection

Depending on your cellular plan, your iPhone or iPad with cellular can share its Internet connection with your Mac. When your iOS device is configured properly and is near your Mac, it appears in the Wi-Fi menu as an available connection.

When you select a cellular device as your Internet connection, the menu icon changes to indicate your Mac is currently linked to the device ( ).

Turn Wi-Fi on or off

If you're in an environment where Wi-Fi isn't permitted (like on some airline flights) you can quickly turn off Wi-Fi from this menu.

  1. Click the Wi-Fi icon in the menu bar.
  2. Choose 'Turn Wi-Fi off.'

When Wi-Fi is turned off, the menu icon changes to and empty indicator ( ). When you're ready to use Wi-Fi again, click the menu icon and choose 'Turn Wi-Fi on.' Then connect to the network you want to join if your Mac doesn't join it automatically.

Connections Mac Os Catalina

If you don't see the Wi-Fi menu

You can enable and disable the Wi-Fi menu from the Network pane of System Preferences.

  1. From the Apple menu, choose System Preferences.
  2. Click Network in the System Preferences window.
  3. Select Wi-Fi in the list of available network connections.
  4. Select (check) the option to 'Show Wi-Fi status in menu bar.'

Create a network

Connections mac os x

Build iOS apps from the Windows command-line

Pair to Mac supports building Xamarin.iOS applications from the commandline. For example:

The parameters passed to msbuild in the above example are:

  • ServerAddress – The IP address of the Mac build host.
  • ServerUser – The username to use when logging in to the Mac build host.Use your system username rather than your full name.
  • ServerPassword – The password to use when logging in to the Mac build host.

Note

Visual Studio 2019 stores msbuild in the following directory:C:Program Files (x86)Microsoft Visual Studio2019MSBuildCurrentBin

The first time Pair to Mac logs in to a particular Mac build host fromeither Visual Studio 2019 or the command-line, it sets up SSH keys. With thesekeys, future logins will not require a username or password. Newlycreated keys are stored in %LOCALAPPDATA%XamarinMonoTouch.

If the ServerPassword parameter is omitted from a command-line buildinvocation, Pair to Mac attempts to log in to the Mac build hostusing the saved SSH keys.

Summary

This article described how to use Pair to Mac to connect Visual Studio 2019 to aMac build host, enabling Visual Studio 2019 developers to build native iOSapplications with Xamarin.iOS.

Next steps

Connect to Wi-Fi

You can use the Wi-Fi menu to quickly connect to a nearby wireless network.

  1. Click the Wi-Fi icon ( or ) in the menu bar.
  2. If Wi-Fi is off, choose 'Turn Wi-Fi on.'
  3. Select a nearby Wi-Fi network from the list.

If you don't see your network listed, make sure it's nearby and that others can connect to it. It could also be a 'hidden' network. You can connect to a hidden network by choosing 'Join other network' and entering the name of the network you're trying to use.

The strength of each nearby network is shown next to its name. More darkened bars indicate a stronger network connection.

Enter your password

Networks that have a lock icon next to their name require a password. After you select your network, enter the network password when you're prompted. If you don't know the network password, check with the owner of the Wi-Fi network you're trying to join.

Use a cellular device as your Wi-Fi connection

Depending on your cellular plan, your iPhone or iPad with cellular can share its Internet connection with your Mac. When your iOS device is configured properly and is near your Mac, it appears in the Wi-Fi menu as an available connection.

When you select a cellular device as your Internet connection, the menu icon changes to indicate your Mac is currently linked to the device ( ).

Turn Wi-Fi on or off

If you're in an environment where Wi-Fi isn't permitted (like on some airline flights) you can quickly turn off Wi-Fi from this menu.

  1. Click the Wi-Fi icon in the menu bar.
  2. Choose 'Turn Wi-Fi off.'

When Wi-Fi is turned off, the menu icon changes to and empty indicator ( ). When you're ready to use Wi-Fi again, click the menu icon and choose 'Turn Wi-Fi on.' Then connect to the network you want to join if your Mac doesn't join it automatically.

Connections Mac Os Catalina

If you don't see the Wi-Fi menu

You can enable and disable the Wi-Fi menu from the Network pane of System Preferences.

  1. From the Apple menu, choose System Preferences.
  2. Click Network in the System Preferences window.
  3. Select Wi-Fi in the list of available network connections.
  4. Select (check) the option to 'Show Wi-Fi status in menu bar.'

Create a network

Collections Macon Ga

If you want to create a temporary Wi-Fi connection between your Mac and another device, you can create your own network from the Wi-Fi menu.

Mac Connection Refused

  1. Click the Wi-Fi menu and choose Create Network.
  2. Enter the details for your network, such as a network name and channel

When you create a computer-to-computer network, the menu icon changes to show a computer (). When you're done, click the Wi-Fi menu again and choose Disconnect to close the network you created.





broken image